www.rc-easy.de, Donocik GmbH, Jeti model Distributor
Main page » Catalogue » 2-LiPo U-BEC » 11360 Your account | Shopping Cart | Cash box
JETI MaxBEC voltage controller for 2 cells Lipoly 37,90 EUR
incl. 19 % Tax excl. Shipping costs
Product No.: 11360
Print product data sheet
Shipping time: with DHL, 1-3 days with DHL, 1-3 days
JETI MaxBEC voltage controller for 2 cells Lipoly
JETI MaxBEC voltage controller for 2 cells Lipoly
JETI MaxBEC voltage controller for 2 cells Lipoly

JETI MaxBEC current supply receiver of 2 Lipo/Li-Ion cells

main:


This
redundant voltage regulator has got:

- secure on/off switch conception;
- secure redundant voltage regulator;
- protective program of LiPoli Battery that protect it for the destruction through lower tension;
- selection system of the tensions in four steps;
- Double feeding into the receivers slots (because of security and overheating);
- Four-stage optical tensions indication of the battery tension
- you can tune these regulators very simply by means of the Jumper.

BEC MIXED is a linear regulator and it is developed special for models with current supply of the receiver of 2 Li-Po/Li-ions cells or several NiCD/NiMH cells. The voltage output from the Servos is constant, and so portrays itself through a uniform movement speed of the Servos.

Specs

JETI JES 030

  • Recommended input voltage : 5,5 - 8,4V
  • Max. input voltage: 16,0 V
  • output voltage adjustable: 5,0 V; 5,4 V; 5,7 V; 6,0 V
  • Max temperature : 130 C°
  • Carry current: 5,0 A ( see Table )
  • Quiescent current: 17mA
  • Max horsepower loss : 7 Watt
  • dimension : 50 x 25 x 10 mm


BEC MIXED is furnished with either of 2 Li-Po/Li-ions or 5-6 NiCD/NiMH cells. The tension of the current supply batteries is indicated with four LEDs. If the tension is higher than 7,0V, all three green LEDs illuminate. With the progressive removal of the tension during the action (flights trips), the LEDs begin to extinguish gradually after each other. The gradations are: <7 V, <6.7 V and <6.45 V. If the entrance tension is lower than 6,5V,
the red LED will blink them self, to indicate discharged batteries. If you use a 2- Li-Po/Li-ion cells battery, the cell tension will decline on 3,25V per cell.

The receiver current supply batteries are connected to a cable of 0.5 mm², named “input”. It is in addition a 3 poliges cable with Graupner connector that serves as a drawer entrance, so it isn’t necessary to separate the current supply cable (input)

The exit side (current supply to the receiver) is equipped with two Servo cable connections. Therewith is guaranteed an increased security and a stronger current removal. You can connect these to each free Servo cable to your receiver.

On the exit side (Output) it is an on/off switch, with that one you can turn on the MaxBEC. This is called “secure switch”.

In the case of mechanical damage or tension disconnection, the MaxBEC activates itself and furnishes current to your Models

Table of the current loading capacity depending from the input /output voltage:


Input voltage

(Cells/number)

Output voltage [V]

5

5,4

5,7

6

2 Lixx / 6 NiXX

2,92 [A]

3,50 [A]

4,12 [A]

5,00 [A]

3 LiXX / 10 NiXX

1,15 [A]

1,23 [A]

1,30 [A]

1,37 [A]

12 NiXX

0,85 [A]

0,90 [A]

0,93 [A]

0,97 [A]




This Product was added to our catalogue on Monday, 12. March 2007.

We recommend following products:
Controllers up to 20A:
Jeti SPIN 99 OPTO V3
Jeti SPIN 99 OPTO V3
from 229,00 EUR
Jeti SPIN 200 OPTO
Jeti SPIN 200 OPTO
from 345,00 EUR
Controllers up to 80A:
JETI ADVANCE 45 OPTO PLUS brushless controller for 8-24 NC/3-8 L
JETI ADVANCE 45 OPTO PLUS brushless controller for 8-24 NC/3-8 L
69,00 EUR
elektro-3:
Jeti SPIN 48 OPTO
Jeti SPIN 48 OPTO
from 79,00 EUR
JETI ADVANCE 90 OPTO PLUS F3A Regler für 3-10 LiPos
JETI ADVANCE 90 OPTO PLUS F3A Regler für 3-10 LiPos
179,00 EUR
Charger 2:
eStation Balancer Adapter für BC6 für 2-6 Zellen (POLYQUEST)
eStation Balancer Adapter für BC6 für 2-6 Zellen (POLYQUEST)
2,90 EUR


This product is compatible too (for example):


HCS H ROTON 600W/12 brushless Motor
HCS H ROTON 600W/12 brushless Motor
89,00 EUR


Customers who bought this product bought also the following products:

JETI MaxBEC MPX Spannungsregler für  2 Lipo/2 Li-Ion Zellen JETI MaxBEC MPX Spannungsregler für 2 Lipo/2 Li-Ion Zellen
JETI MaxBEC Spannungsregler für Empfängereinspeisung mit 2 Lipos
44,90 EUR
1 x 'JETI MaxBEC MPX Spannungsregler für  2 Lipo/2 Li-Ion Zellen' order
15827 POWER ION AKKU 2900mAh 2S1P 15827 POWER ION AKKU 2900mAh 2S1P
POWER ION AKKUs von Jeti mit besonderer Robustheit und Belastbarkeit.
44,90 EUR
1 x '15827 POWER ION AKKU 2900mAh 2S1P' order
20253 Jeti Antispark Set / Antiblitz Set  5,5mm 20253 Jeti Antispark Set / Antiblitz Set 5,5mm
Goldkontakt 4mm Stecker
12,80 EUR
1 x '20253 Jeti Antispark Set / Antiblitz Set  5,5mm' order
12235 JETI Duplex REX 7 12235 JETI Duplex REX 7
JETI DUPLEX Receiver REX7 with Antenas 200mm
79,90 EUR
1 x '12235 JETI Duplex REX 7' order
Goldkontakt CT 1,  1 Paar Goldkontakt CT 1, 1 Paar
Goldkontakte 1 Paar CT1 nur 0,8mm für Hallenflieger
1,80 EUR
1 x 'Goldkontakt CT 1,  1 Paar' order
Jeti USB Adapter Jeti USB Adapter
JETI Datakabel fÃŒr Rx Verbund
16,90 EUR
1 x 'Jeti USB Adapter' order
15112 Akkupack 2900mAh 7,4V  Panasonic NCR18650PF 15112 Akkupack 2900mAh 7,4V Panasonic NCR18650PF

39,00 EUR
1 x '15112 Akkupack 2900mAh 7,4V  Panasonic NCR18650PF' order
JETI Duplex Komfortohrhörer mit Kabelset 3,5mm JETI Duplex Komfortohrhörer mit Kabelset 3,5mm
JETI DUPLEX Ohrhörer komfort
22,90 EUR
1 x 'JETI Duplex Komfortohrhörer mit Kabelset 3,5mm' order
12113 JETI Duplex Telemetriemodul MUI 75A EX 12113 JETI Duplex Telemetriemodul MUI 75A EX
JETI DUPLEX Modul MUI 75
41,90 EUR
1 x '12113 JETI Duplex Telemetriemodul MUI 75A EX' order
41241 Trimmlead spheres smal 100 Gramm 41241 Trimmlead spheres smal 100 Gramm
trimm lead 100 Gramm
5,00 EUR
1 x '41241 Trimmlead spheres smal 100 Gramm' order